CENTROPACK™
PV SYSTEM INSTALLATION ACCESSORIES
CentroPack™ PV System Installation Accessories
To complement our CentroPack residential system packages, CentroSolar offers a variety of accessories to enable solar panel installation onto a variety of roof types. The SolarMount™ racks supplied include L-feet for flush roof mounting. To insure a safe, reliable and code compliant professional installation, accessories in addition to the products supplied in every CentroPack system are recommended for wire management, roof flashings and hardware attachments for asphalt shingle and tile roofing. Tilt legs are needed in some cases for flat or E/W facing roofs or ground mounted arrays. SolarMount rails supplied are either 132” or 168” long.
SolarMount™ Tilt Legs-Adjustable
High Profile Tilt Legs - SolarMount rails 120” and longer require 4 legs per rack, not recommended for rails over 180”. Tilt legs are adjustable. Includes (4) two piece adjustable legs and stainless fasteners.
Low Profile Tilt Legs - Optimize the tilt angle on E/W pitched roof to face south or for flat roof. Three tilt legs are required for rails from 120-180”. When splicing adjacent rails together, one tilt leg may be omitted, includes one adjustable tilt leg and hardware.
SolarMount™ Standoffs/Flashings, L -Feet & Tile Hooks
Use Flat Top-Aluminum Two-Piece Standoffs for SolarMount rails and L-Feet, with No-Calk flashing for extra roof clearance, secure to rafter with two-lag screws, secure L-foot to standoff. Use soft aluminum flashings for tile roofs (replaces S-tile). Standoffs Include; Shaft (1-5/8” dia.), base assembly, 3/8” bolt/lock washer, 2 lag screws and EPDM washer.
Quick Mount PV®
Quick Mount PV is an all-in-one waterproof flashing and mount to anchor photovoltaic racking systems, to a new or existing roof, preventing water damage at penetrations. Made in the USA of all aluminum and includes stainless steel hardware. Works with all standard racks, installs seamlessly and saves labor by not needing to cut away any roofing, will outlive galvanized 2 to 1. It is a good idea to do a thorough roof evaluation prior to your project installation. At this time you should do a layout on the roof confirming everything on the drawing will fit as it is intended. Any irregularities should be noted now, so that you can deal with them simply on install day. The quality of the roofing should be determined, so that any repairs or replacement can happen before or in conjunction with the installation. On a composition roof it is important to know as much as possible about: the manufacturer, the age of roof, the type of substrate (plywood or oriented strand board [OSB]), the rafter size, the spacing and span, the age of roof structure, who roofed it, etc.
Wire Management - PV Pull Boxes / Combiners
Wiley Electronics
- ‘ACE’ conduit box allows simple PV String wiring to conduit transition-, as a pull box or as combiner box from 1-4 PV strings.
- Compatible with any conduit type, side and bottom knockouts ¾” – 1”, includes aluminum mounting bracket and hardware.
- Protective enclosure for transition from USE-2 / PV wire (maximum 9 conductor’s #10AWG) to THWN-2 wiring into conduit
- Two-piece enclosure for unobstructed wiring, DIN rail mount allows terminal blocks and fuse holders (fuses not included)
- UL listed Enclosure NEMA 3R rated for outdoor use, separate models for Pull Box (w/terminals) or as Combiner Box (w/fuse holders)
SolaDeck - PV Pull Box Model 786-BR
Economical-Low profile roof mount PV-pull box incorporates flashing for waterproof installation onto composition shingle roofs. Aesthetically pleasing design can be also located below solar array. Bottom knockouts permit wiring directly into attic. All CentroPack systems include cord fittings and terminal blocks for SolaDeck. All models are fabricated from galvanized steel using a draw die system. This insures a seamless base with maximum water protection. The cover and base are drawn to match fit. The base has 5 dimples for centering knockouts that can be used for either strain relief fittings or conduit. All dimples can be set for .5” and the two corner dimples can be punched up to .75”. A two-position ground lug is also fastened to the base with a steel stud. Model 786 has 6” Din rail. All models are listed by ETL as UL50 Type 3R enclosures for outdoor use. Finish: Powder Coated (Derby Brown) to withstand 1000 hours Salt Spray and High UV resistance.
CENTROPACK™
PV SYSTEM INSTALLATION ACCESSORIES
CentroPack™ PV System Installation Accessories
To complement our CentroPack residential system packages, CentroSolar offers a variety of accessories to enable solar panel installation onto a variety of roof types. The SolarMount™ racks supplied include L-feet for flush roof mounting. To insure a safe, reliable and code compliant professional installation, accessories in addition to the products supplied in every CentroPack system are recommended for wire management, roof flashings and hardware attachments for asphalt shingle and tile roofing. Tilt legs are needed in some cases for flat or E/W facing roofs or ground mounted arrays. SolarMount rails supplied are either 132” or 168” long.
SolarMount™ Tilt Legs-Adjustable
High Profile Tilt Legs - SolarMount rails 120” and longer require 4 legs per rack, not recommended for rails over 180”. Tilt legs are adjustable. Includes (4) two piece adjustable legs and stainless fasteners.
Low Profile Tilt Legs - Optimize the tilt angle on E/W pitched roof to face south or for flat roof. Three tilt legs are required for rails from 120-180”. When splicing adjacent rails together, one tilt leg may be omitted, includes one adjustable tilt leg and hardware.
SolarMount™ Standoffs/Flashings, L -Feet & Tile Hooks
Use Flat Top-Aluminum Two-Piece Standoffs for SolarMount rails and L-Feet, with No-Calk flashing for extra roof clearance, secure to rafter with two-lag screws, secure L-foot to standoff. Use soft aluminum flashings for tile roofs (replaces S-tile). Standoffs Include; Shaft (1-5/8” dia.), base assembly, 3/8” bolt/lock washer, 2 lag screws and EPDM washer.
Quick Mount PV®
Quick Mount PV is an all-in-one waterproof flashing and mount to anchor photovoltaic racking systems, to a new or existing roof, preventing water damage at penetrations. Made in the USA of all aluminum and includes stainless steel hardware. Works with all standard racks, installs seamlessly and saves labor by not needing to cut away any roofing, will outlive galvanized 2 to 1. It is a good idea to do a thorough roof evaluation prior to your project installation. At this time you should do a layout on the roof confirming everything on the drawing will fit as it is intended. Any irregularities should be noted now, so that you can deal with them simply on install day. The quality of the roofing should be determined, so that any repairs or replacement can happen before or in conjunction with the installation. On a composition roof it is important to know as much as possible about: the manufacturer, the age of roof, the type of substrate (plywood or oriented strand board [OSB]), the rafter size, the spacing and span, the age of roof structure, who roofed it, etc.
Wire Management - PV Pull Boxes / Combiners
Wiley Electronics
- ‘ACE’ conduit box allows simple PV String wiring to conduit transition-, as a pull box or as combiner box from 1-4 PV strings.
- Compatible with any conduit type, side and bottom knockouts ¾” – 1”, includes aluminum mounting bracket and hardware.
- Protective enclosure for transition from USE-2 / PV wire (maximum 9 conductor’s #10AWG) to THWN-2 wiring into conduit
- Two-piece enclosure for unobstructed wiring, DIN rail mount allows terminal blocks and fuse holders (fuses not included)
- UL listed Enclosure NEMA 3R rated for outdoor use, separate models for Pull Box (w/terminals) or as Combiner Box (w/fuse holders)
SolaDeck - PV Pull Box Model 786-BR
Economical-Low profile roof mount PV-pull box incorporates flashing for waterproof installation onto composition shingle roofs. Aesthetically pleasing design can be also located below solar array. Bottom knockouts permit wiring directly into attic. All CentroPack systems include cord fittings and terminal blocks for SolaDeck. All models are fabricated from galvanized steel using a draw die system. This insures a seamless base with maximum water protection. The cover and base are drawn to match fit. The base has 5 dimples for centering knockouts that can be used for either strain relief fittings or conduit. All dimples can be set for .5” and the two corner dimples can be punched up to .75”. A two-position ground lug is also fastened to the base with a steel stud. Model 786 has 6” Din rail. All models are listed by ETL as UL50 Type 3R enclosures for outdoor use. Finish: Powder Coated (Derby Brown) to withstand 1000 hours Salt Spray and High UV resistance.